Engineering-grade systems
Every unit is designed in-house, manufactured to IS / ASME standards, and backed by Bharti Enviro's commissioning and service teams — from compact package plants to full-scale ZLD and FGD trains.
Water Treatment
Products
Wastewater Systems
Products
Air Pollution Control
Products
Water Treatment Plant
Complete potable and process water solutions — from raw-water clarification to ultrapure demineralised water — engineered to Indian BIS and international drinking-water standards.
Clarifier System
High-rate lamella and conventional clarifiers for reliable suspended-solids removal.
- Lamella inclined-plate modules increase effective settling area by 6–8× over conventional designs
- Automated peripheral-drive sludge rake with adjustable torque protection
- Stainless-steel 304/316L or FRP construction options for corrosive feed water
Water Filtration Plant
Rapid gravity and pressure filters engineered for potable and process water clarity.
- Dual-media or multi-media beds with anthracite, silica sand, and garnet layers
- Automatic air-scour + water backwash sequence for maximum bed regeneration
- Pressure filter variants up to 6 bar for elevated service without booster pumps
Water Softening Plant
Ion-exchange softeners that eliminate scale and protect boilers, heat exchangers, and membranes.
- Strong-acid cation (SAC) resin with ≥ 120 eq/L exchange capacity
- Duplex/triplex lead-lag configuration for continuous 24/7 soft-water supply
- Automatic multi-port valve (MPV) or individual-valve regeneration cycles
Ultra-Filtration Plant
Hollow-fibre UF membranes delivering pathogen-free water at micron-level precision.
- 0.01–0.1 µm hollow-fibre membranes — 4-log virus and 6-log bacteria removal
- Integrity-tested modules with individual dead-end or cross-flow operation modes
- Chemical-enhanced backwash (CEB) and clean-in-place (CIP) automation
Reverse Osmosis Plant
High-rejection spiral-wound RO systems for pure water production from any feed source.
- 95–99.8% TDS rejection using premium Dow/Hydranautics/Toray RO elements
- Energy-recovery devices (ERDs) on SWRO trains reduce specific energy by up to 40%
- 2-pass / 3-pass design for pharmaceutical-grade ultrapure water production
De-Salination Plant
SWRO and MSF desalination systems converting seawater into potable supply.
- SWRO single-pass or double-pass configuration with isobaric energy-recovery devices
- Cartridge filtration + UF pre-treatment reduces SDI below 3, protecting RO elements
- CO₂ dosing + calcite contactor for WHO-compliant Ca/Mg remineralisation
Demineralization Plant
Two-bed and mixed-bed DM plants delivering conductivity < 0.1 µS/cm for critical process use.
- Two-bed SAC/SBA + polishing mixed-bed for conductivity < 0.1 µS/cm
- Counter-current regeneration reduces acid and caustic consumption by 30–40%
- Continuous deionisation (CDI/EDI) polishing option eliminates chemical regeneration
Mineral Water Treatment & Process Water Plant
BIS IS 14543-compliant packaged drinking and process water plants for commercial bottling.
- Complete BIS IS 14543 compliant train from raw water to filling-line supply
- Dual UV (254 nm) + ozone disinfection for 6-log microbial reduction without residuals
- Controlled mineral re-addition (Ca, Mg, K) via calibrated dosing for brand consistency
Need a custom or non-standard design?
Our engineers design around your process — capacity, footprint, and compliance requirements.